Hot Sale Automatic Feed Pet Dryer Machine From China
Pet Feed Dryer Overview
Pet feed dryer is usually used in combination with Pet feed cooler in the Pet feed pellet line. Pet feed pellets are transported from Pet feed extruder to the pellet dryer machine, then being conveyed on the mesh belt which is made of stainless steel. Speaking of the mesh belt, it is with multi-layer structure and movable, which makes our dryer fast-drying & high-efficiency, so the dryer machine is also called Mesh-belt Type Pet Feed Dryer. This pellet dryer machine is widely applied in chemical, food, medicine, building materials, electronics and other industries, specially applicable to dry granular materials and pellets.
Characteristics of Pet Feed Dryer
1.High-efficiency and energy saving
2.Easy to install and maintain
3.Fast drying speed, high evaporation intensity
4.Convenient drying parameters adjustment, flexible operation, wide adaptation
5.Higher work capacity, the range of drying time is adjustable
6.Standardized production, users can increase the number of segments according to production
Working principle of Pet Feed Dryer
There is circulating fan, heating device, fresh-air-suction-system and exhaust-exiting system. Operator can take independent operational parameter control of temperature, humidity and exhaust gas re-circulation rate, which ensures the reliability of the fish feed pellet dryer, and the optimization of the operating conditions. Mesh-belt Type Fish Feed Dryer has good security and operation flexibility. The drying process is carried out in a fully-sealed box, effectively avoiding dust leakage. Damp materials are evenly spread on the mesh belt which is driven to move by transmission device in the dryer machine. From bottom to top, hot air flow through the mesh belt and fish feed pellets on it. In the drying process, heat exchange is sufficient & uniform, drying efficiency being extremely high.
Operation and Maintenance of Pet Feed Dryer
1.Head of the machine
The machine head is composed of two driven rollers, tightener, feed inlet and outlet.
Passive bearing bears the tension and determines the tightness of the mesh belt, so bearings at both ends of the passive rollers should be regularly lubricated with high temperature (above 200ºC) lubricating grease, to ensure the normal operation of the dryer.
Tightener is to adjust the mesh belt tightness. The first installation, mesh belt should be tightened, and after heating up, tightening again (because of the thermal expansion).
2.Drying section
This stage is the actual working area of material drying, blast pipe and discharge pipe being installed on the top. Hot air flows into the underpart of the inner chamber from both sides, then extracted out by wind turbine from the middle. There are control valves being installed on the air inlet and outlet to adjust air velocity.
3.Dryer end
The transmission part is installed in the end of the fish feed pellet dryer. The tightness of the transmission chain can be adjusted by adjusting the position of the gear reducer. Transmitting gear on the other side of the gear reducer will also inject lubricating oil to extend its service life.
PRODUCT DETAILS
Parameter of Pet Feed Dryer
| Model |
Output(kg/h) |
Heating power(kw) |
Net belt motor power (kw) |
Blower Power
(kw) |
The layer number of mesh belt
(layer) |
Dinmenions(mm) |
Weight(kg) |
| WH150 |
120-200 |
15 |
1.5 |
0.12*2 |
3 |
3200*1200*1550 |
650 |
| WH250 |
200-300 |
18 |
1.5 |
0.12*2 |
5 |
3200*1200*1850 |
850 |
| WH350 |
300-400 |
24 |
2.2 |
0.12*2 |
5 |
4000*1350*2150 |
980 |
| WH500 |
500-600 |
27 |
2.2 |
0.12+0.55 |
5 |
4500*1500*2400 |
1500 |
| WH750 |
700-800 |
30 |
3.0 |
0.12+0.55 |
5 |
5200*1500*2400 |
2200 |
| WH1000 |
1000-1200 |
36 |
3.0 |
0.12+1.1 |
5 |
5850*2100*2500 |
3100 |
| WH2000 |
1800-2000 |
45 |
4.0-5.5 |
0.37+1.1 |
7 |
6200*2100*2900 |
3850 |
Feed production line process:
Crusher------- Crushing the grain materials or big materials into powder
Mixer-------- it is used to mix different raw materials together, we have vertical mixer and Horizontal ribbon mixer for powder.
Extruder/pellet mill ----------cooking and making floating fish feed pellets or animal feed
Dryer--------- mesh-belt dryer, drying the feed pellet
Cooler---------contraflow cooler cooling the feed pellet for packing
Packing machine----------- It will pack the feed pellet into bags for selling and storing.
Other accessory machines for the animal feed or fish feed production
Packing and shipping
The Pet Feed Dryer machine for sale would be covered by plastic, and then packed in standard ply wooden package for exporting.
Our Services
| 1 |
We provide 1 year guarantee with life-time service. |
| 2 |
We provide English manual and video for operation |
| 3 |
If required, we could send technicians for installation and commissioning, training. |
| 4 |
Any problem in operation or others about the machine, you can contact with us we will give
solution in 24-48 hours. If big problem, we can send technician to customer's local place. |
Contact information:
If you have interest in this advanced Pet Feed Dryer machine for sale, kindly please send us inquiry.
Audited Supplier 
){kind=link}
){kind=link}